DAP - D2613 - PSS-106 Battery powered speaker with wireless receiver

PSS-106 Battery powered speaker with wireless receiver

The PSS-106 Battery powered speaker with wireless receiver from DAP is a versatile mobile audio solution with a nice sounding 6.5 "woofer and 1" tweeter. The design allows you to use it as a Floor Monitor, Tilt Back or even as a PA thanks to the presence of a 35mm tripod housing and the ability to adjust the monitor status at the bottom of the cabinet.
Equipped with a lightweight 2-channel Class D amplifier, the PSS-106 can handle two microphones and one audio source, such as USB, a Bluetooth device or a device with (mini) jack output. It has a built-in microphone receiver and comes with a dedicated wireless handheld microphone.
The battery lasts up to 5 hours at full power and is fully rechargeable in 5 hours. This makes it a very affordable and reliable mobile solution for a wide variety of applications.

Please note that there is also a PSS-106 speaker without integrated microphone receiver and wireless handheld microphone.

Specifications:

Go out
Main outputs 1
6.3mm Balanced TRS Main Output Connectors
Low Driver Power 90 W.
High Driver Power 10 W.
100W amplifier RMS output power.
Peak Amplifier Power 160 W.

Entrances
Mono inputs 2
Mono XLR 3-pin, TS unbalanced 6.3mm input connection
Max level balanced mono inputs 1 dBu
Auxiliary audio input 1
3.5mm balanced TRS Aux audio input connection
Unbalanced Aux input max level 10 dBv

Reproduction
Supported audio file type MP3
Support USB-A input / output, SD card

Audio Specifications
Class D amplifier class
Speaker type Battery operated
Maximum SPL at 1m 110dB
Minimum frequency response 70 Hz
Maximum frequency response 20000 Hz
Frequency response (-6dB) minimum 70 Hz
Frequency response (-6dB) maximum 20000 Hz
High crossover frequency 1900 Hz
Woofer diameter 6.5 "
1.5 "Woofer coil
Driver diameter 1 "
Magnet Type Neodymium Driver
Microphone type Dynamic
Dynamic range 100 dB

Audio controls
2 band parametric microphone equalizer
Microphone channel equalizer range 10dB
Fixed microphone input frequencies 100, 10,000 Hz
2-band parametric channel equalizer
Input channel equalizer range 10dB
Fixed frequencies input channel 100, 10,000 Hz
Integrated FX yes
FX type Reverb

Wireless Specifications
863 MHz wireless microphone starting frequency band
Final frequency band wireless microphone 865 MHz
RF power 10 MW
2 MHz RF bandwidth
Wireless stability 0.005%
A2DP Bluetooth audio profile

Drums
Type AA, lithium-ion
Voltage 25.9V
Capacity 2.2 Ah
Duration @Full 5 hours
Average duration 8 hours
Charging time 5 hours

Control and programming
LED screen

Connections and electrical specifications
Power supply 220V-240V AC 50Hz
Power consumption 100 W.
1.6 A fuse
CEI power input connection
Mechanical Specifications
Height (mm) 323 mm
Width (mm) 240 mm
Length (mm) 265 mm
Transmitter Height (mm) 48 mm
Transmitter Width (mm) 48 mm
Transmitter Length (mm) 245 mm

SECTION material
Weight 5.9 kg
Transmitter weight (mm) 0.2 kg
IP degree IP20 (indoor use only)
Black colour
Painted finish

Product Specifications
VOX yes
35 mm stand mounting
Cooling Convection
Electronic protection Clip limiter, overheating, overload, thermal
LED Indicators Battery Status, BT Pairing, Charging, Power, Protection, Signal
Diffuser grille Steel
Upper diffuser handles
Wheels None

Thermal characteristics
Maximum ambient temperature 40 ° C
Minimum ambient temperature 5 ° C

Parts included
Cables included IEC cable
Accessories included Wireless Microphone